Aluminum alloy metal roof plate is a new material, you can choose the right sheet according to the situation of the roof, mainly for some large industrial, commercial and civil buildings, can cope with the changing building roof, with good waterproof, energy saving, beautiful effect, so the application of aluminum alloy metal roof plate is more extensive, is a very important part of modern construction.
As a modern roof must have the effect of safety and durability, rain and wind protection, heat insulation, and beautiful appearance, aluminum alloy metal roof plate meets all the above requirements and is a very ideal roofing material. At the same time, as a part of modern architecture, aluminum alloy metal roof panels have strict design requirements, providing a more perfect design for many buildings.
Aluminum alloy The thickness of the metal roof plate is 1.2mm, and the mechanical method can be selected for occlusion. The structural layer of the plate is supported by the aluminum alloy fixed seat. Can also be used in the way of hidden button, the whole slope roof has a number of veneers, shelved on the roof of the sandalwood, can play a noise reduction, cold, warm effect. Using sandalwood strips and steel grilles as the skeleton, an insulated T-bracket should be set on the bounce, and an upright locking system roof should be installed after the thermal insulation cotton is laid.
Before installing the aluminum alloy metal roof panel, it is necessary to test and adjust to determine whether the height of each support is the same as the design, because the height of the house board surface is consistent to affect the shape of the entire roof and the wind and waterproof ability, so the aluminum support is the key to ensure the roof resistance. Aluminum support should be checked between the installation of aluminum alloy metal roof panels, and there can be no leakage or less installation.