Color coated aluminum coil use environment

Color coated aluminum coil delicate surface, excellent quality has become the first choice for users in many fields, because of the different uses, in the application of the demand for extra attention. So, what are the precautions when using color coated aluminum coil?
First, if it is to be put into use, the temperature should not be overheated or too cold at the normal temperature. If it is used as the roof, the height should not be less than 10 degrees.
Second, before the device, check in time to ensure that the roof material has no wear appearance, to ensure that it can be used normally, and to ensure the service life under normal circumstances.
Third, the bolt head of the fixed color coated aluminum roll should be sealed with waterproof material to avoid the rain into the rust.
Fourth, the environmental temperature of color coated aluminum coil processing should be above 7℃, according to the thickness of color coated aluminum coil to adjust the gap of the processing roll system, and remove the foreign matter on the roll surface and support plate; At the same time to see whether the color coated aluminum roll double-sided paint, such as paint, should be identified and adopted measures to continue processing.
At present, the amount of colored aluminum coil increases year by year, and it has become the important component of aluminum plate belt. Color coated aluminum coil has the characteristics of low density, long service life, beautiful and clean appearance. It is used in the electric power industry and the chemical industry. In order to make good use of colored coated aluminum coil and prolong the service life of colored coated aluminum coil, there is a certain demand for storage environment of colored coated aluminum coil. Let's take a look at the storage environment of color coated aluminum roll.
First, make sure that the storage environment is ventilated and dry as necessary. Aluminum coil is a non-ferrous metal alloy. If it comes into contact with water, oxidation reaction will occur, which will damage the protective film on the surface of aluminum skin, causing the surface quality of aluminum skin to be affected. Therefore, a dry environment is the basic condition for storing aluminum skin.
The second is the sealing of the packaging. Generally, the aluminum coil will take waterproof packaging when leaving the factory, and there are moisture-proof agents, so users are advised not to damage the packaging method. The packaging is suitable for long-term storage and use. If certain conditions can also be used after the aluminum skin for such packaging.